Someone once said that if you really wanted to keep the air as dirty as possible, it's
to use a traditional vacuum cleaner.
I'm Dr. Joseph A. Bellanti, I'm professor of pediatrics and microbiology immunology
at Georgetown University School of Medicine.
We now recognize that in dust there is not only particles of dirt, but there are particles
of animal parts such as mites, there's mold, there's cockroach antigen, and many other
microorganisms.
Those particles are around 5 to 10 microns.
If we examine the older vacuum cleaners with grandmother vacuuming the carpets, she'd go
over the same spot a hundred times and all she was doing was suctioning air into the
vacuum cleaner and out the other end.
Here at Georgetown we've taken this matter very seriously.
We went to a number of houses and hotels and actually vacuumed carpets, bedding, mattresses,
and measured the amount of mite antigen in dust specimens before and after.
The type of filtration that we were using is the new electrostatic method of filtration.
Before vacuuming you have a very heavy strip here indicating that there is considerable
mite antigen.
After vacuuming there is very little.
Test after test show this same pattern of reduction.
This is very, very serious business and I think that we just need to take it in a positive
way and say that the technology has moved and we ought to move with the technology.
There's a whole range of performance for vacuum cleaners just like any other product.
Vacuum cleaners that only make dust storms in your home all the way to vacuum cleaners
that do a very beautiful job.
I'm Susan Goldsmith, Director of Technical Services for IBR.
As you can see we have a vacuum cleaner in our test chamber at this time.
It's a Kirby upright.
As you can see it's upside down.
What we do is we take test dust and we inject it into air that's going down.
If you look at this, this is pretty typical.
We have many particles here going into the vacuum cleaner and we have no particles or
zero particles coming out of the vacuum cleaner because it's done exactly what it's supposed
to do.
We've taken dusty air and made it clean.
Hello, I'm Jim Salk, Vice President of Marketing for the Kirby Company.
Welcome to the video version of the G5 Owner's Manual.
Before we begin, I'd like to introduce the President and Chief Executive Officer of Kirby,
Mr. Gene Winfeld.
We'd like to take this opportunity to welcome you and your family to the Kirby family.
The fact you've chosen our home care system indicates that you're the type of person who
appreciates quality, reliability, and performance.
Your Kirby is clearly the most advanced home care system on the market today, but our commitment
to you doesn't stop with innovation.
All our efforts are directed towards offering you the most rugged and reliable system in
Kirby history.
Of course it goes without saying that the more you know about the Kirby, the more you
get out of it and the better your investment will become.
That's what this video is all about.
Take the time to learn about using the various parts of your Kirby system and I'm sure it
will deliver you years of dependable service.
Once again, from all of us here at Kirby World Headquarters, thanks for allowing us into
your home and welcome to the Kirby family.
Thanks Gene.
This video was designed to help you take maximum advantage of the powerful features built into
every G5.
Just in conjunction with your printed owner's manual, it will help you make the most of
your new Kirby.
So sit back, relax, and enjoy the G5 owner's manual video.
The Kirby G5, one of the most complete, advanced, easy to use home maintenance systems available
today.
A product for those who appreciate quality, reliability, and performance.
This video owner's manual will help you take advantage of the G5's many features and has
been divided into sections for easy reference.
Part one is called Getting Started.
This section will familiarize you with a few basic G5 features.
Part two will show you how to use your Kirby as an upright and as a portable cleaner.
Part three will help you set up your G5 as a canister cleaner and show you how to use
its wide range of attachments.
Part four will discuss the various optional accessories which complement and add value
to the G5.
Part five will provide you with some handy operating and maintenance tips.
Part six provides answers to some commonly asked questions.
And part seven is the story of the Kirby opportunity.
It represents a chance for someone you know to earn extra income sharing this fine product
with friends and neighbors.
To get the most out of this video owner's manual, view the entire tape first.
Then, when you need a refresher, you can search through the tape to find the specific section
or item you would like to review.
Please note this video is not intended to replace your G5 owner's manual.
It can help get you started, but if you need more information, consult the owner's manual
included with your G5.
This section, Getting Started, covers general information you'll need to begin using your
G5 including moving and carrying your G5, using the handle tilt latch, using the toe
touch control, adjusting for proper power nozzle height, using tech drive power assist,
installing or changing disposable filter bags, emptying the mini m-tour, and understanding
the belt lifter.
Your G5 is equipped with tech drive.
This variable power assist actually senses the speed and direction of the G5 and provides
up to 90% of the power required to move it back and forth.
Tech drive must be turned off in order to push your G5 when the motor is not running.
To do this, raise the nozzle and push down on the gray N side of the power assist pedal.
The N stands for neutral.
Turn the power off, then unplug the Kirby.
Now you should be able to push the G5 freely.
You can pick up the G5 by the handy carrying grip located at the base of the handle to
carry the G5 to another area.
Your Kirby G5 also has a convenient handle tilt latch, which allows you to lift the front
of the Kirby over door thresholds or throw rugs.
To do so, push the handle tilt latch toward the bag.
Then pull back on the handle until the front of the Kirby lifts up.
The tilt latch will also allow you to store your Kirby in a vertical position.
Lower the handle all the way down and move the tilt latch away from the bag.
You can now stand the Kirby up on its bumper for storage.
When you're ready to use the Kirby again, you'll want to unlock the handle tilt latch.
However, never unlock the handle tilt latch without holding onto the handle.
The handle is spring loaded and could fly up when unlatched.
The toe touch control located over the front wheel raises and lowers the front of your
Kirby.
Step down on the toe touch control bottom pedal to raise the nozzle.
Then each time you press on the toe touch control upper pedal, you will lower the front
of the machine one notch.
It's important to adjust the power nozzle to its proper operating height.
Make sure the power nozzle is up by stepping on the toe touch control bottom pedal.
Turn the Kirby on.
Then step on the upper pedal, lowering the power nozzle one notch at a time until you
hear a change in the tone of the motor.
This means your Kirby has sealed to the carpet.
Then press the toe touch control upper pedal one more time and your power nozzle will be
at the proper height.
To engage tech drive and put the G5 in the power assist mode, push down the green D or
drive side of the tech drive pedal.
This innovative power assist feature eliminates most of the effort required to move your Kirby
back and forth.
To move your Kirby with the motor off, tech drive must be in neutral.
Raise the nozzle.
Push down the gray N or neutral side of the tech drive power assist pedal and your Kirby
should move freely.
Also, tech drive should always be in neutral when cleaning any hard surface flooring.
A disposable filter bag is required for proper operation of your G5.
Before installing or changing a disposable filter bag, unplug the power cord from the
wall outlet and make sure the motor and fan have stopped.
Then unzip the outer bag and pull out the top adapter and disposable filter bag.
Always replace the disposable filter bag when dirt reaches the full line.
Failure to do so will affect performance.
Hold the top adapter steady while you turn the disposable filter bag's cardboard face
plate.
To install a new filter bag, align the slots in the cardboard face plate with the lock
tabs on the adapter.
Then push the adapter into the bag opening and rotate the cardboard face plate right
or clockwise to secure the filter bag.
The bag support strap should be attached to the top adapter.
This is required for proper operation of the disposable filter bag.
If it's not attached, thread the strap through the small hole of the top adapter.
Then place the hole in the strap over the stud on the adapter.
Finally, insert the bag adapter and new filter bag into the outer permanent bag and close
the zipper.
To purchase replacement disposable filter bags, contact your local Kirby distributor.
Or if distance or convenience is a factor, call Kirby Supply Line at 1-800-437-7170.
The Mini M-Tor is designed to collect large, heavy particles, which can be emptied by removing
the Mini M-Tor.
To remove, grasp the Mini M-Tor underneath by its handhold and rotate it away from the
body of the Kirby as far as it will go.
Then lift it off.
The top of the bag is released from the handle by pressing the bag release button.
Position the front opening over a newspaper and shake it to remove the particles.
Though your Kirby G5 can remove larger debris from your floors, never intentionally pick
up heavy objects such as coins, screws, large rocks, or similar objects.
It may cause damage to your Kirby.
Reattach the bag assembly.
Then line up the raised indicator line on the Mini M-Tor with the indicator line on
the air exhaust port.
Rotate the Mini M-Tor toward the Kirby and lock it in place.
The Mini M-Tor must be securely locked into place or the Kirby will not operate.
The belt lifter on your G5 serves two purposes.
The first use is to engage or disengage the brush roll.
The second use is to allow removal of the power nozzle when converting your Kirby for
use with various attachments and optional accessories.
To disengage the belt and prevent the brush roll from rotating, make sure the G5 is unplugged.
Make sure the power nozzle is raised to its highest setting.
Raise the headlight hood.
Flip out the L-shaped handle on the belt lifter.
Use it to turn the belt lifter to the left or counterclockwise until it stops and the
red arrows line up.
Return the L-shaped handle to its closed position.
Lower the headlight hood and your Kirby is ready for use as a straight suction cleaner.
To reengage the belt so the brush roll rotates, turn the belt lifter to the right or clockwise
until the green arrows line up.
Return the handle to the closed position and lower the headlight hood.
The brush roll will now rotate when the power switch is turned on.
Your Kirby G5 is an extremely versatile home care system.
In part two we'll cover using your G5 as an upright cleaner, using your upright as a straight
suction cleaner, cleaning hard surface floors, using your G5 as a portable cleaner, and using
your G5 to clean carpeted stairs and mattresses.
Before you begin cleaning with your new G5, it's important to have the power nozzle adjusted
to the proper height setting.
This gives you the most efficient cleaning action and lengthens belt life.
Before you turn the G5 on, make sure the power nozzle is up by stepping on the bottom pedal
of the toe touch control.
Turn the Kirby on.
Then lower the power nozzle until you hear a change in motor tone.
Press the toe touch control one more time and your power nozzle will be at the proper
operating height.
To engage tech drive, push down the green D or drive side of the tech drive pedal.
Straight suction cleaning allows you to vacuum hard floors, throw rugs, and delicate carpets
without use of the brush roll.
When using the G5 on any hard surface flooring, make sure tech drive is in neutral.
With the Kirby off, turn the belt lifter left or counterclockwise until the red arrows line
up.
The brush roll is now disengaged and your Kirby will operate as a straight suction cleaner.
By attaching the optional hard floor pad, you can dust bare floors with your Kirby in
the straight suction mode.
Before installing the hard floor pad, unplug the power cord from the wall outlet and make
sure the motor and nozzle brush have stopped.
Make sure the nozzle is set to its highest setting.
Attach the hard floor pad onto the nozzle opening using the spring clips on the plate.
Plug the G5 in.
Make sure tech drive is in neutral and turn the power on.
Then lower the power nozzle until the bristles touch the floor.
To remove the hard surface pad, press the toe touch control bottom pedal to raise the
nozzle.
Then, step on the shoulder of the hard floor pad as you tip the G5 to the side.
Besides being a remarkable upright cleaner, the G5 can easily be converted into a portable
cleaner for things like mattresses or carpeted stairs.
To reduce risk of injury in the portable mode, place tech drive in neutral and keep hair
away from the rotating brush inside the nozzle.
To convert your G5 to a portable cleaner, make sure the Kirby is turned off and unplugged.
Release the outer permanent bag top by pressing the bag release button.
Remove the power cord from the upright handle.
Push the release button located at the base of the handle and pull the handle straight
up and out of the slot.
Then, push the portable handle into the same slot and insert the bag latch tab into the
slot on the portable handle.
You are now ready for portable power cleaning.
On carpeted stairs, simply roll the cleaner back and forth so the brush roll agitates
the carpeting and loosens the dirt.
Cleaning soft mattress surfaces is done the same as carpeted surfaces.
Your Kirby should be set up as a portable cleaner.
Make sure tech drive is disengaged and turn the Kirby on.
Lower the power nozzle all the way down.
Change tech drive and begin vacuuming.
For delicate mattresses, turn the belt lifter to the left or counterclockwise until the
red arrows line up and you can use your Kirby as a straight suction cleaner.
Your G5 comes with a wide variety of attachments for added versatility.
In this section, we'll discuss removing the power nozzle to convert to a canister cleaner
using the duster brush, the upholstery nozzle, extension tubes, the suction control grip,
the wall and ceiling brush, the crevice tool, the surface nozzle, and the massage cup.
You'll also cover using your G5 as a blower unit and using the portable sprayer and portable
shampoo.
When using different cleaning attachments, the attachment hose is connected to the front
of the cleaner in place of the power nozzle.
The attachment hose may be used in either the upright or portable configuration.
To install the attachment hose, raise the nozzle, place tech drive in neutral and turn
the power off.
Unplug the Kirby from the wall outlet.
Raise the headlight hood and turn the belt lifter to the left or counterclockwise until
it stops and the red arrows line up.
Unlock the power nozzle and lift it off the Kirby.
Note, in normal operation, friction between the belt and metal motor shaft may cause the
metal motor shaft to be extremely hot to the touch.
At the connector end of the attachment hose, you will notice two hook-shaped lugs.
Hook the lugs over the attaching bar, then push the opening of the hose up against the
Kirby.
Then, lower the headlight hood.
With the attachment hose in place, the G5 will automatically adjust to high-speed hose
operation.
To attach tools to the hose, push lightly while twisting the smaller end of the hose
into the tool.
The duster brush may be connected to the attachment hose or the extension tubes to remove dust
from any surface, including contoured or irregular surfaces.
The upholstery nozzle is used for cleaning upholstered furniture, carpeted steps, clothing,
and the inside of cars.
A suction relief upholstery panel is available for use on drapes and delicate upholstery.
Put the lip of the upholstery tool under the two tabs at the front of the panel.
You're now ready to clean more delicate surfaces.
One or two extension tubes can be attached to the end of the hose to extend your reach
and efficiently use various attachments.
The suction control grip features a valve to control the amount of suction.
Simply slide the valve control back and forth until the desired level of suction is reached.
The suction control grip can be used with the attachment hose between extension tubes
or it can easily be moved to the end of the tubes, giving your brush attachments a different
angle with which to clean.
Attach the wall and ceiling brush to the suction control grip to clean walls, ceilings, and
other surfaces.
By rotating the brush, you can clean hard to reach places like high bookshelves.
The crevice tool with the removable brush cleans dirt from tight places and carpet edges.
Remove the brush and the crevice tool can be used for cleaning cracks, crevices, corners,
grooves, and narrow openings.
The surface nozzle may be used on bare floors or for surface cleaning carpets and under
low furniture.
Rubber wheels on the nozzle allow it to glide silently on the surface of hard floors without
scratching.
Reached with the attachment hose, the massage cup provides an invigorating skin or scalp
massage.
Your G5 can also be used as a blower in either the upright or portable configuration.
Raise the power nozzle, place tech drive in neutral and turn the power off.
Unplug the Kirby from the wall outlet.
Remove the headlight hood and turn the belt lifter to the left until the red arrows line
up.
Unlock the power nozzle and remove it from the Kirby.
Then fasten the air intake guard onto the attaching bar.
Lower the headlight hood.
Remove the mini m-tour and release the top of the bag assembly.
To attach the blower hose, line up the indicator line on the large end of the hose with the
indicator line on the metal exhaust port.
Twist the hose connector to the right to lock it in place.
By attaching the inflator-deflator tool to the attachment hose, you can inflate toys,
air mattresses or other similar low pressure inflatable items.
To deflate items, take the blower hose off the G5.
Clip the bag into place and attach the mini m-tour.
Lift the headlight.
Remove the air intake guard and connect the attachment hose to the front of the Kirby.
You may now use your Kirby to deflate items or clean tight areas such as computer keyboards
or audio-video equipment.
The portable sprayer is used only in the blower mode.
It is an excellent tool to apply many different types of water-based liquids to any type of
surface.
Never use oil or solvent-based paint of any kind in the portable sprayer.
The motor is open to the spray and could ignite flammable and volatile paint solvents.
Also, note that the portable sprayer has not been tested or certified for use by Canadian
Standards Association.
To set up and use the portable sprayer, unscrew the jar and fill three-quarters full with
any non-flammable liquid.
If the sprayer must be tilted during use, less solution should be used to avoid large
droplets in the spray.
Screw the jar and portable sprayer tightly together.
Make sure your Kirby is set up as a blower unit.
The air intake guard should be on the front of the unit and the attachment hose should
be connected to the exhaust port.
Connect the sprayer to the attachment hose.
Turn the Kirby on and squeeze the trigger, spraying your non-flammable solution.
With the nozzle pointed away from you, adjust the spray by turning the spray adjustment
control on the trigger.
Use slow, sweeping motions to spray the desired area with solution.
Always squeeze the trigger fully to permit maximum flow and spray control.
Immediately after use, empty the jar and wash with warm, soapy water.
The portable sprayer dip tube should also be removed and washed.
Remove the nozzle jet by pressing the two latches on the front and pulling it out.
Now, the inside of the sprayer and the nozzle jet can be cleaned.
When dry, return the nozzle jet to the front of the sprayer.
Reassemble the rest of the sprayer so none of the parts will be lost.
Never clean the portable sprayer with flammable cleaning fluids.
The motor is open to the spray and could ignite flammable and volatile solvents.
The portable shampoo is also used in the blower mode only and is designed for fast, easy cleaning
of carpeted stairways and areas that are difficult to reach with the carpet shampoo system.
The portable shampoo is not recommended for use on upholstery or delicate fabrics such
as silk, brocade, or velvet.
If in doubt, try a test patch.
Let the patch dry and check it before you shampoo further.
To set up the portable shampooer, attach the shampooer cap to the end of the portable sprayer.
Fill the jar with water to the water line.
Then add Kirby carpet shampoo to the shampoo line.
It's only Kirby carpet shampoo for best results.
Screw the jar and portable sprayer tightly together.
Connect the sprayer to the attachment hose and make certain your Kirby is set up as a
blower.
The attachment hose should be connected to the air exhaust port and the air intake guard
should be installed on the front of the unit.
Turn the Kirby on and pull the trigger to spray suds onto the surface being cleaned
or spray onto a plain paper bag or into a bowl and then apply to the surface being cleaned.
Adjust the portable sprayer for proper suds volume by turning the spray adjustment control
located on the trigger.
Work suds into the surface with a soft brush or sponge until they disappear.
Allow the surface to dry completely and vacuum to remove the dry residue which contains debris
and loosened dirt.
To purchase additional Kirby carpet shampoo, contact your local Kirby distributor or if
distance or convenience is a factor, call Kirby supply line at 1-800-437-7170.
G4 explains several optional Kirby accessories that will enhance the usefulness of your G5.
These include the carpet shampoo system, the floor care system, the turbo accessory system
and the zip brush.
The carpet shampoo system was designed to help you shampoo, fluff and otherwise maintain
carpeting.
It contains the shampoo system nozzle, tray assembly, system hose, brush roll, tank and
a bottle of Kirby carpet shampoo.
Before shampooing, vacuum the carpeted area thoroughly to remove any loose dirt.
Then unplug the Kirby.
Make sure the nozzle is at its highest setting.
Turn the belt lifter to the left or counter clockwise until the red arrows line up.
Push the accessory lock to the left and remove the nozzle.
Remove the mini m-tour and release the top of the bag assembly.
Pull the shampooer belt up away from the brush.
Make sure the green arrows on the shampoo system nozzle are lined up.
Slide the carpet shampoo system nozzle onto the shampoo tray.
Turn the belt lifter to the left until the red arrows line up.
The belt lifter hook will catch and stretch the belt.
Slide the nozzle tray assembly toward the Kirby and place the hooks on the bottom rear
of the nozzle onto the attaching bar.
Push the nozzle up against the Kirby and lock the nozzle in place.
Turn the belt lifter to the right until the green arrows line up.
The shampoo system tank should be filled or emptied over a sink in case of spillage.
Unscrew the large cup from the top of the tank.
With the tank level, fill to the first line for small rooms, the second line for medium
size rooms or the third line for large rooms.
Fill with warm water, not hot.
Then add Kirby carpet shampoo.
Use one cupful for small rooms, two cupfuls for medium size rooms and three cupfuls for
large rooms.
Note that using more than the appropriate number of cupfuls could cause over-foaming.
Replace the large cup into the opening on the top of the tank.
One tankful of this solution should clean an area about 9 by 12 feet.
Larger carpets may require emptying the tray and refilling the tank.
To attach the tank, match up the lines on the tank and the exhaust port, slide the tank
down and rotate it toward the Kirby.
Lower the nozzle to its lowest setting.
The hose has a light and a dark end.
Insert the dark end firmly into the tray hole.
Then attach the light end to the tank.
To control the amount of suds, turn the suds control valve right or clockwise for more
suds and left or counterclockwise for less suds.
Turning the valve to the off position will stop the flow of suds completely.
Start with the suds control valve on.
Plug the Kirby into the wall outlet.
Turn the Kirby on and engage tech drive.
Suds flow should begin immediately.
As you move the Kirby forward, foam will be released and the brush will work it into the
carpet.
Pulling the G5 back in the same path should dispense suds for the full width of the tray.
If not, move the G5 more slowly or clean the shampoo tank filter if necessary.
Also, to shampoo along edges, make sure the tank is on the opposite side of the edge being
cleaned.
Once the surface being cleaned has been covered with a blanket of foam, wait about 10 minutes.
Then turn the suds control valve off and go over the entire area again.
After allowing the surface to dry completely, attach the power nozzle and vacuum the dried
suds residue.
Note that the Kirby shampoo system, when used with Kirby carpet shampoo according to directions,
has been tested safe on treated carpeting and will not affect stain resistant properties.
To purchase additional Kirby carpet shampoo, contact your local Kirby distributor or if
distance or convenience is a factor, call Kirby Supply Line at 1-800-437-7170.
To clean the carpet shampoo system, raise the nozzle and unplug the Kirby from the wall
outlet.
Pull the hose from the shampoo tray.
Raise the headlight hood.
Turn the belt lifter to the left until the red arrows line up.
Release the nozzle tray assembly and carry it to the sink.
Then turn the belt lifter to the right until the green arrows line up.
Pull the tray and nozzle apart.
Disconnect the shield by gently pulling out the ends of the tray just behind the brush
roll.
Remove the brush roll by simultaneously pushing on both ends of the tray just behind the brush
roll.
Rinse the tray.
Disconnect the shield.
Finally rinse the brush.
Then remove any lint from the brush tufts.
Shake excess water from the brush roll by brushing your hand over the bristles.
Rinse the nozzle.
Finally dry all parts with a towel.
Snap the brush back into place.
The brass end goes into the larger opening.
Reattach the shield.
Then reattach the nozzle to the tray assembly.
Make sure the green arrows on the nozzle line up to avoid stretching the belt during storage.
Then pull off the light gray end of the hose and remove the shampoo tank.
To clean the tank, remove the sponge filter and the cup.
Rinse both thoroughly with cold water.
Rinse the hose.
Care out the remaining carpet shampoo solution and rinse the shampoo tank.
Rinse the sud screen on the bottom of the tank.
When clean and dry, replace them to their original positions.
To replace the carpet shampoo system nozzle belt, turn the belt lifter until the green
arrows line up.
Lift the nozzle off the tray assembly.
Then rotate the tray shield away from the brush.
Push down on both ends of the brush simultaneously and the brush will snap out.
Remove the old belt and place a new Kirby approved belt in the center of the brush.
Both brush roll ends have a narrow side and a wide side.
Make sure the narrow side is facing up.
Place the brush roll on the carpet with the brass end to your left.
Place the tray over the brush roll and snap the brush roll into place.
Close the shield and pull the belt up.
Replace the nozzle with the belt lifter facing the tray.
Turn the belt lifter to the left until the red arrows line up.
The belt should not be stretched for an extended period, so make sure the green arrows on the
belt lifter line up before storage.
To purchase replacement belts, contact your local Kirby distributor or if distance or
convenience is a factor, call Kirby Supply Line at 1-800-437-7170.
Your G5 can be used as an effective floor care system for cleaning, waxing, or buffing
floors.
For clean hard surface floors, make sure your Kirby is off and unplugged.
Raise the headlight hood.
To disengage the brush roll, turn the belt lifter to the left until the red arrows line
up.
Make sure the nozzle is set to its highest setting.
Attach the hard floor pad.
Slide the Kirby in.
Make sure tech drive is in neutral and turn the Kirby on.
Lower the power nozzle until the brushes contact the floor and you're ready to clean any hard
surface floor.
Heavily soiled floors may need additional cleaning, such as damp mopping.
Your Kirby can also be used to wax hard surface floors.
Before applying wax, first attach the buffer nozzle to the G5.
Unplug the Kirby from the wall outlet.
Make sure the nozzle is at its highest setting.
Remove the power nozzle.
Then drop the buffer nozzle onto the floor buffer brush.
Push the belt up against the brush roll with your finger.
While holding the belt in place, turn the belt lifter to the left or counterclockwise
until the red arrows line up.
The belt lifter hook will catch the belt and stretch it upward into the nozzle.
Attach the nozzle.
Turn the belt lifter to the right or clockwise until the green arrows line up.
Lower the headlight hood.
Make sure tech drive is in neutral by stepping on the end side of the power assist pedal.
Your Kirby is now ready for use as a buffer.
To wax hard floors, assemble the roller waxer applicator by pushing the two halves together
until the spring loaded pin clicks into place.
Remove the wax roller from the canister.
Insert the applicator into the open end of the wax roller.
Pull the roller bag off the wax roller and save the packing bag.
Use the roller to apply a small amount of Kirby Miracle Wax.
It's not necessary to cover the entire floor completely.
To remove the wax roller from the handle, push the wax roller into the packing bag.
Grasp both the packing bag and roller firmly.
Push the roller away from you to compress the retaining spring and pull the roller off
the bar.
Seal the bag to prevent premature drying and store in a safe place away from kids and pets.
For easier storage, you can disconnect the roller handle by pressing down the spring
loaded pin and pulling the two ends apart.
Then spread the wax with a floor buffer.
First, make sure tech drive is in neutral.
Before you turn the Kirby on, grasp it firmly by the handle.
The floor buffer tends to move forward when the unit is on and the brush is in contact
with the floor.
Turn the Kirby on.
Lower the brush as far as the toe touch control will allow.
To spread the wax, move the Kirby over the floor as though you were cleaning a carpet
using slow, steady strokes.
Wait five minutes.
When dry, buff to a bright sheen.
For marble floors, use the same procedures, but buff immediately, avoiding any drying
time.
Hard floors may be rebuffed any time it's necessary.
Waxing is not necessary every time you buff.
Apply additional wax when rebuffing does not produce desired results.
Also, do not stand the Kirby on end for polishing.
Make sure tech drive is in neutral for polishing.
And do not use Kirby Miracle Wax on rubber or asphalt tiles.
To order additional Kirby Miracle Wax, contact your local Kirby distributor.
Or if distance or convenience is a factor, call Kirby Supply Line at 1-800-437-7170.
Your G5 floor buffer can also be used as a carpet fluffer to reset the nap on a matted
down carpet.
Before placing the Kirby on the carpet, make sure tech drive is in neutral and the nozzle
is all the way up.
Then place the cleaner on the carpet.
Plug in the power cord.
Holding onto the handle firmly, start the G5 and lower the nozzle one notch at a time
until the brushes contact the carpet.
Engage tech drive power assist and push the G5 back and forth over the carpet.
Lowering the brush too far may cause certain carpet types to fuzz.
For that reason, use of the carpet fluffer is not recommended for delicate carpets.
The turbo accessory system can be used for a wide variety of household jobs.
It's a sander, a buffing unit, a scouring unit, and a massage unit.
Note, when using the turbo accessory system as a sander, it is always advisable to use
safety glasses.
The Kirby should be in the canister mode.
To begin, unsnap the sander dust shroud at the rear of the tool and lift it off.
Wrap up the levers on the side of the turbo accessory to open the clamps.
Select the correct grade of sandpaper needed for the job.
Find paper for a smooth finish or coarse paper to clean rough surfaces or remove paint.
Slide the sheet into the front clamp and lock the clamp lever.
Carefully wrap the paper around the bottom of the turbo accessory and tuck the end into
the rear clamp.
Then lock the rear clamp.
With the turbo accessory on a level surface, wrap the dust shroud around the sander with
the opening to the rear and snap it shut.
Be sure no metal objects such as tacks or nails are sticking up from the surface to
be sanded.
They could damage the turbo accessory or cause sparks, which could ignite dust.
Insert the attachment hose into the end of the turbo accessory.
Turn the Kirby on.
Press the on button on top of the sander and grip the sander at the front and rear.
While applying light pressure, move the sander over the surface slowly, allowing it to do
the work.
Don't force it or lean heavily on it.
That will only slow it down and the tool works best at high speeds.
Replace the disposable filter bag after extended sanding because the dust is fine and tends
to plug the pores of the bag.
To use the turbo accessory as a polisher, attach the synthetic lambs wool pad using
the same procedure as attaching sandpaper.
Use it for polishing hard wax surfaces such as table tops, paneling, and large flat surfaces.
The dust shroud is not used when polishing.
Replace the webbed nylon scouring pad using the same procedure as attaching sandpaper.
The turbo accessory now becomes a scouring tool.
Use it for scouring hard surfaces.
The dust shroud is not used with the scouring pad.
For safety reasons, do not turbo scour painted surfaces.
The turbo accessory massage unit is intended for use where massage is desired or medically
recommended.
To use the orbital massage unit, attach the soft vinyl pad to the turbo accessory using
the same procedure as attaching sandpaper, but the dust shroud is not necessary.
Attach the suction control grip to the hose and then attach the tool.
Press the G5 and just hit the on switch for a relaxing massage.
To adjust the level of vibration, use the suction control.
Do not use the orbital massager on swollen or inflamed areas, legs with varicose veins,
areas where there are skin eruptions, unexplained calf pains, or anesthetic skin areas unless
first approved by your doctor.
In addition, children must be supervised when using the massager.
When connected to the attachment hose, the zip brush can be used for a wide variety of
cleaning jobs, including carpeted steps, upholstery, or in the car.
For best results, avoid pressing down heavily on the zip brush.
Allow the brush to rotate at maximum speed by gently moving it side to side on the surface
being cleaned.
For safety's sake, do not insert fingers into the revolving brush area or push the release
button while the brush is in motion.
Keep the brush flat against the surface being cleaned.
The brush can throw particles outward.
Also, avoid using the zip brush on delicate fabrics.
To clean the zip brush, remove it from the hose.
Then use the hose to clean any lint from the brush.
Press the button on the front of the brush to release the outer brush ring.
Take the center brush air turbine out of the tool and remove any particles or lint.
Remove any particles left in the tool cavity.
Place the brush air turbine back into the tool and turn it until the tabs drop into
the slots.
Hook the tab on the rear of the ring brush into the small opening of the tool and snap
it back into place.
Your G5 is a highly sophisticated home care system.
As with most modern appliances, it requires a modest degree of routine maintenance to
keep it operating efficiently.
This section presents a few maintenance tips on things such as changing the power nozzle
belt, adjusting the brush roll for optimum performance, light bulb replacement, wheel
replacement, and electrical cord replacement.
After extended use, the power nozzle belt on your G5 may become stretched or worn causing
the belt to slip.
If this condition exists, simply replace the belt with a new Kirby approved belt.
To change the belt, remove the nozzle from the Kirby.
Then release the belt tension by turning the belt lifter to the right or clockwise until
the green arrows line up.
Unlock the rug plate by unhooking the two latches on the rear of the nozzle.
Note if there are one or two notches exposed on the end of the brush roll.
Lift out the belt and brush roll.
Cut off the old belt and replace it with a new Kirby belt.
Place the belt and brush roll back into the nozzle.
Make sure the adjustment setting, one or two notches, is the same as when the brush was
removed.
Then center the belt on the brush.
Replace the rug plate and then latch the two locks that hold it in place.
Turn the belt lifter to the left or counterclockwise until the red arrows line up.
This will stretch the belt inside the nozzle.
Now you are ready to reattach the power nozzle and reengage the belt.
To purchase replacement belts, contact your local Kirby distributor or if distance or
convenience is a factor, call Kirby Supply Line at 1-800-437-7170.
As shipped from the factory, brush roll height is set at the normal setting.
But if you have delicate carpets, such as Berber or Oriental rugs, you may want to adjust
the brush roll height.
First, remove the power nozzle from the Kirby by turning the belt lifter to the left until
the red arrows line up.
Then release the belt tension by turning the belt lifter back to the right or clockwise
until the green arrows line up.
Unlock the two latches on the rear of the power nozzle to remove the rug plate.
Lift the brush out of the nozzle.
The normal setting is indicated by two notches, the delicate by one notch.
Replace both ends to the desired setting.
Place the brush back into the nozzle, making sure both ends are set to the same number
of notches.
Replace the rug plate by placing it on the front of the bumper first and then pulling
it over the bumper on the rear of the power nozzle.
Secure the two rug plate latches.
Then turn the belt lifter to the left or counterclockwise until the red arrows line up.
The nozzle can now be attached to the Kirby.
If the light bulb on your Kirby burns out, you may wish to contact your authorized Kirby
distributor for replacement.
If you prefer to install a new light bulb yourself, turn off the Kirby and unplug it
from the wall outlet.
Use the headlight hood.
Locate the horizontal tab in the center.
Insert a flat screwdriver in the tab and pop the lens off.
Lower the headlight hood.
Gently wiggle the light bulb until it loosens and pull it out of the socket.
Gently push a new light bulb into the opening.
With both notches on the rear of the lens facing up, insert the lens into the lens opening
and gently fit it in place.
Kirby G5 wheels are made with a pliable tread that is designed to prevent carpet wear and
prevent damage to non-carpeted floors.
After extended use, the wheels will wear out and need to be replaced.
Check wheel tread occasionally to determine if the wheels need to be replaced.
The tread material is lighter than the wheel itself.
If any of the darker wheel is showing through the tread, the wheel needs to be replaced.
Contact your nearest Kirby service center for prompt courteous wheel replacement.
A functional electrical cord is essential for the safe operation of your Kirby.
Be careful not to run over the cord and always unplug your unit by grasping the plug rather
than yanking on the cord.
If the electrical cord connecting your Kirby to the outlet becomes cut or frayed, do not
use the unit.
Contact your authorized Kirby service center immediately for replacement.
Many people often have questions about maintenance and specific operating techniques.
Here are a few of the most frequently asked questions.
If the motor doesn't run when you turn your Kirby on, make sure the power cord is plugged
in.
Check your breaker or fuse box to make sure the outlet has power.
Make sure the cord is fully inserted into the Kirby.
Look for breaks in the power cord insulation.
If the cord is damaged, replace it with a genuine Kirby power cord.
Do not attempt to repair damaged electrical cords.
Make sure all accessories and other attachments are properly mounted on the front.
Also, the Kirby will not operate unless a bag assembly, attachment hose, or shampoo
tank is properly attached to the exhaust port.
Any of these must firmly click into place for the Kirby to operate.
If you're having difficulty with installation, apply water to the gasket to reduce friction.
If your Kirby isn't picking up dirt or lint from your carpeting, make sure the nozzle
height is adjusted properly.
Lower the nozzle until you hear a change in motor tone.
Then lower it one more notch.
Improper height adjustment will affect air flow.
Check the bag to see if it's full.
If it is, change it.
If it's still not picking up dirt and lint, the brush roll may need to be adjusted to a
different height.
If the brush roll is not turning freely, the belt may be slipping, broken, or not on the
motor pulley.
Replace the belt with a new Kirby belt.
Or another cure might be to replace the old brush roll with a new one.
If you smell burning rubber when using your Kirby, the power nozzle may be adjusted too
close to the carpet.
Just try raising the nozzle one or two notches to see if that remedies the situation.
Or raise the nozzle and then lower it one notch at a time until the motor tone changes.
Then lower it one more notch.
If that doesn't help, make sure the belt lifter is fully engaged or disengaged.
Or the cause may be threads or hair wrapped around the brush roll.
Take the brush roll from the nozzle and remove any threads or hair.
To vacuum your mattress, remove all bedding, including the mattress cover.
Your Kirby should be set up as a portable cleaner.
Make sure tech drive is disengaged and turn the Kirby on.
Cover the power nozzle all the way down.
Engage tech drive and begin vacuuming.
For delicate mattresses, turn the belt lifter to the left or counterclockwise until the
red arrows line up.
And you can use your Kirby as a straight suction cleaner.
You can vacuum your carpeted stairs in several ways.
You can use your Kirby as a portable cleaner.
You can use the zip brush.
Or you can use the upholstery nozzle.
To vacuum stairs in the portable mode, convert your upright to a portable cleaner.
Make sure tech drive is disengaged.
Plug in your Kirby.
Place the Kirby on the steps and turn it on.
Lower the nozzle until you hear a change in motor tone.
Then lower it one more notch and begin vacuuming.
You can put your other hand under the back of the Kirby if you need to for balance.
To vacuum upholstered furniture, convert your Kirby to a canister and use the upholstery
nozzle, the crevice tool without the brush, or the zip brush.
Apply light pressure when using the zip brush.
To clean hard to reach places like furniture buttons, use the narrow tip of the zip brush.
To clean your walls and ceilings, convert your Kirby to a canister.
Attach one or two extension tubes to the attachment hose.
Attach the suction control grip and then the wall and ceiling brush.
Now you're ready to clean.
Your G5 comes equipped with a wide range of tools to clean your car.
With the Kirby in the canister mode, use the end of the attachment hose for straight suction.
Use the upholstery nozzle to clean car seats.
Or, if you need more cleaning power, try the zip brush.
Use the crevice tool for hard to reach areas like between the dash and windshield.
Use the duster brush to clean the instrument panel.
And use the massage cup to pick up heavier particles on the floor.
The G5 is helpful for cleaning a wide variety of home furnishings.
To clean books and bookcases, use the duster brush.
Use the duster brush to clean pictures and other large hanging objects.
Using the suction control grip and the duster brush, you can clean delicate surfaces like
lampshades.
Using the duster brush, you can clean home electronics surfaces.
With the inflator-deflator attachment, you can clean tight spaces like computer keyboards.
For irregular surfaces like wicker, use the duster brush to get into the small cracks.
For drapes and blinds, attach one or two extension tubes.
Attach the suction control grip.
For drapes, attach the upholstery nozzle.
Make sure the faceplate is attached.
Test the airflow, and you're ready to clean.
Use the same procedure for blinds, but use the duster brush instead of the upholstery
nozzle.
That covers the basics of your new Kirby G5 home maintenance system.
If you have any questions, please contact your nearest Kirby distributor.
I certainly hope the Owner's Manual video will help you get the most out of your new
Kirby.
The G5 represents the most advanced system we've ever offered, and it's sure to be the
most well-received Kirby ever.
Right now, we're looking for enterprising individuals to help spread the word about
this fantastic product.
If you know someone who would like to earn extra income by showing the G5 to friends
and neighbors, have them contact your local Kirby distributor.
It's an opportunity to share the G5 story and earn a few hundred dollars a month in
the process, and in today's economy, who couldn't use some extra cash?
Your local Kirby distributor can fill you in on all the details.
Meanwhile, all of us here at Kirby want to welcome you and your family to the Kirby family,
and hope your new G5 serves you well for years to come.
Come join us for morephony on Kirby!